The Gemini 38-AUD two-stage commercial split system is a highly efficient and reliable HVAC (heating, ventilation, and air conditioning) solution for commercial and industrial use. This system can provide heating and cooling to large buildings and spaces, making it a versatile option for various settings.
The Gemini 38AUD comes equipped with a two-stage compressor, one of its most notable features. This type of compressor enables the system to function at a range of capacities, which are determined by the temperature and humidity levels of the area responsible for conditioning. The system will function at a lower capacity when the weather is mild, which will reduce the amount of energy consumed and help bring down the overall operating costs. In more severe weather, the system can function at a higher capacity to maintain the area at a temperature acceptable for human habitation. This operation, which consists of two stages, makes it possible to achieve greater energy efficiency and improved temperature control, both of which can ultimately result in cost savings for the owner of the building.
Evaporator and condenser coils that operate at a high-efficiency level are another benefit of the Gemini 38 AUD air conditioner. Copper tubing and aluminum fins, both of which are designed to transfer heat effectively and efficiently, are used in the construction of these coils. The evaporator coils draw heat from the interior of the building, transfer it to the condenser coils, and then the condenser coils discharge the heat into the exterior air. Using high-efficiency coils guarantees that the system will keep the room at the desired temperature while consuming the least energy possible.
The Gemini 38AUD also has an advanced control system that allows for precise temperature control and easy operation. The system includes a programmable thermostat, which can be set to maintain a specific temperature schedule and can also control the system remotely through a web-based interface. This allows for easy monitoring and adjustments to the system, beneficial for buildings open at different times of the day, such as schools or office buildings.
The Gemini 38AUD has a design that ensures its longevity and makes it simple to perform routine maintenance. Heavy-gauge steel was used in the building’s construction because it can withstand the rigorous conditions of industrial and commercial settings. The device also comes equipped with service ports that are easy to access, making it possible to perform maintenance and repairs in a short amount of time.
Overall, the Gemini 38-A two-stage commercial split system is a high-performance HVAC solution that offers energy efficiency, precise temperature control, and easy operation. Its two-stage compressor, high-efficiency evaporator and condenser coils, and advanced control system make it ideal for commercial and industrial use. In addition, the system is built to last and is easy to maintain, ultimately leading to cost savings for the building owner over time.
- 38AUD two cooling stages with EERs from 11.0 to 11.2
- ASHRAE 90.1 Efficiency Compliant
- Standard crankcase heater
- Compressor vibration isolation
- Low ambient temperature control
- Unit performance certified per ARI standard 340/360
- High and low-pressure switches
- Anti-short cycling protection
- Prepainted, galvanized steel cabinets that pass a 500-hour salt-spray test
- Compressor overload protection
- Scroll compressor
- E-Coat coil protection
- UL, UL, Canada, or ETL approved
- Shipped with Puron (R-410A) refrigerant partial charge
- Single-piece design
- Perimeter base rail with forklift slots and lifting holes facilitates rigging
- Suitable for mounting on the ground or the rooftop
- 24V control circuit transformer permits quick, easy wiring of thermostats
- Comfort Alert™ diagnostic board
- Powered and non-powered 115-v convenience outlet
- Compressor access panel with easy grip handle
- Easy starting, no-strip screw feature
- Non-fused disconnect switch
Contact Us for a Free Quote
Commercial Installation Assessment