A/C Service Contracts & Maintenance

29-Point Precision AC Tune-Up

1. Check & Calibrate Thermostat
2. Measure Refrigerant Pressures
3. Clean Filter
4. Check Relays
5. Inspect Capacitors
6. Inspect Contractor Points
7. Check Electrical Connections
8. Inspect Disconnect Box
9. Check Heating Functions
10. Vacuum and Flush Drain Line
11. Clean and Flush Primary Drain Pan
12. Install Anti-Algae Tablets
13. Inspect Evaporator Coil Condition
14. Brush Evaporator Coil
15. Inspect Condition of Condenser Coil
16. Rinse and Clean Condenser Coil
17. Measure Motor AMP Draw
18. Measure Compressor AMP Draw
19. Test Safety Float Switch
20. Ducts Sprayed with Deodorizer
21. Inspect Compressor Terminals
22. Inspect Air Ductwork Condition
23. Measure Temperature at Supply Grill
24. Measure Temperature at Return Grill
25. Measure Temperature Differential
26. Install Clean Out T For Flushing Line (if required)
27. Check and Measure Static Air Flow
28. Check On/Off Circuit Breaker Safety
29. Check Emergency Drain Pan Float Switch (if applicable) In Attic Installations