Aquazone 50PSW Water-to-Water Water Source Heat Pump is a heat pump that utilizes water as the heat source and heat sink. It is designed for use in commercial and industrial applications, such as in large buildings, schools, and hospitals.
The Aquazone 50PSW is a versatile and efficient system that can provide both heating and cooling. It uses a closed-loop water system, which means that the water that is used as the heat source is separate from the water that is used as the heat sink. This allows the system to maintain a consistent temperature and reduces the risk of contamination.
The heat pump comprises several key components, including a compressor, evaporator, condenser, and expansion valve. The compressor is responsible for compressing the refrigerant and raising its temperature, while the evaporator absorbs heat from the water source and transfers it to the refrigerant. The condenser then releases the heat into the water sink, and the expansion valve regulates the refrigerant flow to ensure optimal efficiency.
The Aquazone 50 PSW Water-to-Water Water Source Heat Pump is highly efficient and can provide significant energy savings compared to traditional HVAC systems. It operates on a COP (Coefficient of Performance) of up to 5.5, which means that it can provide 5.5 units of energy for every unit of electricity used. This is significantly higher than the COP of traditional systems, which typically ranges between 2 and 3.
The Aquazone 50PSW is also designed for easy maintenance and service. It has a compact design, which makes it easy to install and service, and it is equipped with various safety features, such as pressure relief valves, to protect against potential damage. Additionally, you can integrate the system with building automation systems to monitor and control the system’s performance.
Another advantage of the Aquazone 50PSW Water-to-Water Water Source Heat Pump is its ability to use various water sources, including groundwater, surface water, and even wastewater. This makes it an excellent option for many applications and environments, including areas where traditional HVAC systems may not be suitable.
Overall, the Aquazone 50PSW Water-to-Water Water Source Heat Pump is an advanced and efficient HVAC solution that can provide significant energy savings and improved comfort in commercial and industrial applications. In addition, its versatility, easy maintenance, and ability to use different water sources make it a great choice for a wide range of projects.
Performance Features
- EERs up to 25.7
- Capacities from 2 to 35 nominal tons
- Non-ozone depleting Puron® refrigerant
- Belt-driven centrifugal blowers
- High-efficiency scroll compressors
- Water loop (boiler/tower and ground loop/water) application use with an operating temperature range of 20° to 110°F
- Extended range package for open loop and geothermal applications
- Fully insulated unit with acoustic-type insulation
- Dual refrigerant circuits for two-stage operation
- Dual coaxial coils
- Computer-selected vibration isolators
- Mute package for quiet operation
- Complete C control system (standard) or Deluxe D control system
- Equipped with a performance monitor to ensure efficient heat pump operation
- TXV (thermostatic expansion valve) controlled
- Copper or cupronickel heat exchanger
- Exceeds ASHRAE 90.1 performance requirements
- ARI/ISO 13256-1 Certified
Maintenance Features
- Access to the compressor section through 2 service panels
- All service may be done through the large removable front or side panels.
- Quick electrical disconnects on components
- Easy removal of the control box for access to all refrigerant components
- Refrigerant circuit equipped with high/low-pressure ports
Installation Features
- Units may be mounted in closets, attics, etc.
- Side-by-side and top manifold designs
- Pre-wired and factory charged with Puron refrigerant (R-410A)
- Single-point electrical connection
- Water connections are FPT and secured to the cabinet.
Reliability Features
- Galvanized steel construction
- Computer-selected vibration isolation
- Reversing valve (4-way), water-to-refrigerant coaxial coil, and enhanced aluminum fin/rifled copper tube air-to-refrigerant heat exchanger standard
- Microprocessor control
- CSA and ETL certified
Contact Us for a Free Quote
Commercial Installation Assessment